English version →
カテゴリ
CVE-2024-46706

Kernel の脆弱性 (CVE-2024-46706)

概要

Kernel に 脆弱性 (CVE-2024-46706) が存在。不正な操作・情報露出のリスクがあります。対策: 6.6.48, 6.10.7 以上に更新。

原文の説明

取得元が公開している説明をそのまま載せています (多くは英語)。

In the Linux kernel, the following vulnerability has been resolved:

tty: serial: fsl_lpuart: mark last busy before uart_add_one_port

With "earlycon initcall_debug=1 loglevel=8" in bootargs, kernel
sometimes boot hang. It is because normal console still is not ready,
but runtime suspend is called, so early console putchar will hang
in waiting TRDE set in UARTSTAT.

The lpuart driver has auto suspend delay set to 3000ms, but during
uart_add_one_port, a child device serial ctrl will added and probed with
its pm runtime enabled(see serial_ctrl.c).
The runtime suspend call path is:
device_add
|-> bus_probe_device
|->device_initial_probe
|->__device_attach
|-> pm_runtime_get_sync(dev->parent);
|-> pm_request_idle(dev);
|-> pm_runtime_put(dev->parent);

So in the end, before normal console ready, the lpuart get runtime
suspended. And earlycon putchar will hang.

To address the issue, mark last busy just after pm_runtime_enable,
three seconds is long enough to switch from bootconsole to normal
console.

出典: OSV.dev (Open Source Vulnerabilities) NVD OSV

自動生成の要約

取得元のデータ (CVSS・CWE・影響バージョンなど) から SecPulse が定型文で組み立てた要約です。AI は使っていません。正確な内容は下の原文と参照URLで確認してください。

Kernel という製品で、CVE-2024-46706 という番号がついた弱点 (脆弱性) が見つかりました。
不正な操作・情報露出のリスクがあります。
対策: Kernel を 6.6.48, 6.10.7 以上に更新してください。
心配なら、システム担当者や製品の公式サイトで「Kernel CVE-2024-46706」を検索してください。

CVE-2024-46706 (Kernel)
修正バージョン: 6.6.48, 6.10.7 (即時適用推奨)
対応方針: 1) SBOMで影響バージョン横断確認, 2) ステージング検証→本番更新, 3) WAF/プロキシで該当エンドポイントを監視, 4) ログでIOC調査。
参考: 当ページの『参照URL』の GHSA / vendor advisory / patched release を参照。

❓ 何が問題か

Kernel に 脆弱性 (分類未定) があります。

📍 影響範囲

Kernel の影響バージョンはベンダーのアドバイザリで確認してください。

🔥 重要度

重要度: ?。不正な操作・情報露出のリスクがあります。

🔧 修正方法

6.6.48, 6.10.7 に更新してください。

🛡️ 暫定回避

修正版が未提供時は、影響機能の無効化・WAFルール・ネットワークACLでの遮断を検討。

🔍 検知方法

Webサーバ・プロキシ・WAFログで該当CVEのIOCに合致する不審リクエストを検索。SBOM/依存ファイルで影響バージョンを横断確認。

対応アクション

SOC/SREチームが順番に実行すべき具体的なステップとコマンド例

  1. 1
    影響範囲の特定 identify
    grep -r 'Kernel' . | grep -v node_modules

    リポジトリと本番環境の依存ファイル (package-lock.json / requirements.txt / go.sum / Gemfile.lock 等) で Kernel を grep し、稼働しているサービス・バージョンを把握する。

  2. 2
    パッチ適用 patch
    Upgrade Kernel to 6.6.48, 6.10.7

    ステージング環境で 6.6.48, 6.10.7 に上げて回帰テスト → 本番反映。回帰テストはアプリの主要ハッピーパスを含めること。

  3. 3
    事後検証 verify
    Confirm patched version is live in production

    パッチ適用後、ステージングで PoC または同等の悪用パターンを再現して脆弱性が閉じたことを確認。本番ではアクセスログ・WAF でアラート再発が無いか継続監視。

影響パッケージ

Linux Kernel
[{"type":"ECOSYSTEM","events":[{"introduced":"6.2.0"},{"fixed":"6.6.48"}]},{"type":"ECOSYSTEM","events":[{"introduced":"6.7.0"},{"fixed":"6.10.7"}]}]

ディストリビューション別の修正状況

各ディストリビューションが公開している、この CVE の修正パッケージ

参照URL

当サイトでは、アクセス解析と広告の効果測定のために Cookie を使います。株式会社Game のサイト共通の設定です。 詳しく