Linux kernel に 解放後使用 (Use-After-Free) (CVE-2026-43203)
概要
Linux kernel に 脆弱性 (CVE-2026-43203) が存在。悪用されるとシステム全体を乗っ取られる可能性があります。
原文の説明
取得元が公開している説明をそのまま載せています (多くは英語)。
In the Linux kernel, the following vulnerability has been resolved:
atm: fore200e: fix use-after-free in tasklets during device removal
When the PCA-200E or SBA-200E adapter is being detached, the fore200e
is deallocated. However, the tx_tasklet or rx_tasklet may still be running
or pending, leading to use-after-free bug when the already freed fore200e
is accessed again in fore200e_tx_tasklet() or fore200e_rx_tasklet().
One of the race conditions can occur as follows:
CPU 0 (cleanup) | CPU 1 (tasklet)
fore200e_pca_remove_one() | fore200e_interrupt()
fore200e_shutdown() | tasklet_schedule()
kfree(fore200e) | fore200e_tx_tasklet()
| fore200e-> // UAF
Fix this by ensuring tx_tasklet or rx_tasklet is properly canceled before
the fore200e is released. Add tasklet_kill() in fore200e_shutdown() to
synchronize with any pending or running tasklets. Moreover, since
fore200e_reset() could prevent further interrupts or data transfers,
the tasklet_kill() should be placed after fore200e_reset() to prevent
the tasklet from being rescheduled in fore200e_interrupt(). Finally,
it only needs to do tasklet_kill() when the fore200e state is greater
than or equal to FORE200E_STATE_IRQ, since tasklets are uninitialized
in earlier states. In a word, the tasklet_kill() should be placed in
the FORE200E_STATE_IRQ branch within the switch...case structure.
This bug was identified through static analysis.
出典: NIST National Vulnerability Database NVD GitHub Advisory
自動生成の要約
取得元のデータ (CVSS・CWE・影響バージョンなど) から SecPulse が定型文で組み立てた要約です。AI は使っていません。正確な内容は下の原文と参照URLで確認してください。
Linux kernel という製品で、CVE-2026-43203 という番号がついた弱点 (脆弱性) が見つかりました。
悪用されるとシステム全体を乗っ取られる可能性があります。重要度は CVSS スコア 7.5/10 です。
対策: ベンダー公式の修正版に更新してください。
心配なら、システム担当者や製品の公式サイトで「Linux kernel CVE-2026-43203」を検索してください。
CVE-2026-43203 (Linux kernel) — CWE-416 / CVSS v3 7.5
攻撃ベクター: ネットワーク経由 (リモート攻撃可) / 認証不要
対応方針: 1) SBOMで影響バージョン横断確認, 2) ステージング検証→本番更新, 3) WAF/プロキシで該当エンドポイントを監視, 4) ログでIOC調査。
参考: 当ページの『参照URL』の GHSA / vendor advisory / patched release を参照。
Linux kernel に 解放後使用 (use-after-free) (CWE-416) があります。
Linux kernel の影響バージョンはベンダーのアドバイザリで確認してください。
重要度: 重要 (CVSS 7.5/10)。悪用されるとシステム全体を乗っ取られる可能性があります。
ベンダー公式アドバイザリの修正版に更新してください。
修正版が未提供時は、影響機能の無効化・WAFルール・ネットワークACLでの遮断を検討。
Webサーバ・プロキシ・WAFログで該当CVEのIOCに合致する不審リクエストを検索。SBOM/依存ファイルで影響バージョンを横断確認。
対応アクション
SOC/SREチームが順番に実行すべき具体的なステップとコマンド例
-
1影響範囲の特定 identify
Audit SBOM/dependencies for affected components.資産台帳・SBOM・依存マニフェストで Linux kernel を使っているサービスとバージョンを洗い出す。
-
2事後検証 verify
Confirm patched version is live in productionパッチ適用後、ステージングで PoC または同等の悪用パターンを再現して脆弱性が閉じたことを確認。本番ではアクセスログ・WAF でアラート再発が無いか継続監視。
影響パッケージ
ディストリビューション別の修正状況
各ディストリビューションが公開している、この CVE の修正パッケージ
- BellSoft Alpaquita BELL-CVE-2026-43203 linux-lts 修正版: 6.1.167-r0
- Debian DEBIAN-CVE-2026-43203 linux 修正版: 5.10.257-1
- Ubuntu UBUNTU-CVE-2026-43203 linux
参照URL
- advisory nvd.nist.gov
- advisory github.com
- package git.kernel.org
- web git.kernel.org
- web git.kernel.org
- web git.kernel.org
- web git.kernel.org
- web git.kernel.org
- web git.kernel.org
- web git.kernel.org
- web git.kernel.org
- web github.com