Linux kernel の脆弱性 (CVE-2026-46148)
概要
Linux kernel に 脆弱性 (CVE-2026-46148) が存在。不正な操作・情報露出のリスクがあります。
原文の説明
取得元が公開している説明をそのまま載せています (多くは英語)。
In the Linux kernel, the following vulnerability has been resolved:
spi: microchip-core-qspi: control built-in cs manually
The coreQSPI IP supports only a single chip select, which is
automagically operated by the hardware - set low when the transmit
buffer first gets written to and set high when the number of bytes
written to the TOTALBYTES field of the FRAMES register have been sent on
the bus. Additional devices must use GPIOs for their chip selects.
It was reported to me that if there are two devices attached to this
QSPI controller that the in-built chip select is set low while linux
tries to access the device attached to the GPIO.
This went undetected as the boards that connected multiple devices to
the SPI controller all exclusively used GPIOs for chip selects, not
relying on the built-in chip select at all. It turns out that this was
because the built-in chip select, when controlled automagically, is set
low when active and high when inactive, thereby ruling out its use for
active-high devices or devices that need to transmit with the chip
select disabled.
Modify the driver so that it controls chip select directly, retaining
the behaviour for mem_ops of setting the chip select active for the
entire duration of the transfer in the exec_op callback. For regular
transfers, implement the set_cs callback for the core to use.
As part of this, the existing setup callback, mchp_coreqspi_setup_op(),
is removed. Modifying the CLKIDLE field is not safe to do during
operatio…
出典: NIST National Vulnerability Database NVD GitHub Advisory
自動生成の要約
取得元のデータ (CVSS・CWE・影響バージョンなど) から SecPulse が定型文で組み立てた要約です。AI は使っていません。正確な内容は下の原文と参照URLで確認してください。
Linux kernel という製品で、CVE-2026-46148 という番号がついた弱点 (脆弱性) が見つかりました。
不正な操作・情報露出のリスクがあります。重要度は CVSS スコア 5.5/10 です。
対策: ベンダー公式の修正版に更新してください。
心配なら、システム担当者や製品の公式サイトで「Linux kernel CVE-2026-46148」を検索してください。
CVE-2026-46148 (Linux kernel) — CVSS v3 5.5
攻撃ベクター: ローカル / 被害者操作不要
対応方針: 1) SBOMで影響バージョン横断確認, 2) ステージング検証→本番更新, 3) WAF/プロキシで該当エンドポイントを監視, 4) ログでIOC調査。
参考: 当ページの『参照URL』の GHSA / vendor advisory / patched release を参照。
Linux kernel に 脆弱性 (分類未定) があります。
Linux kernel の影響バージョンはベンダーのアドバイザリで確認してください。
重要度: 中 (CVSS 5.5/10)。不正な操作・情報露出のリスクがあります。
ベンダー公式アドバイザリの修正版に更新してください。
修正版が未提供時は、影響機能の無効化・WAFルール・ネットワークACLでの遮断を検討。
Webサーバ・プロキシ・WAFログで該当CVEのIOCに合致する不審リクエストを検索。SBOM/依存ファイルで影響バージョンを横断確認。
対応アクション
SOC/SREチームが順番に実行すべき具体的なステップとコマンド例
-
1影響範囲の特定 identify
Audit SBOM/dependencies for affected components.資産台帳・SBOM・依存マニフェストで Linux kernel を使っているサービスとバージョンを洗い出す。
-
2事後検証 verify
Confirm patched version is live in productionパッチ適用後、ステージングで PoC または同等の悪用パターンを再現して脆弱性が閉じたことを確認。本番ではアクセスログ・WAF でアラート再発が無いか継続監視。
影響パッケージ
ディストリビューション別の修正状況
各ディストリビューションが公開している、この CVE の修正パッケージ
- BellSoft Alpaquita BELL-CVE-2026-46148 linux-lts
- Debian DEBIAN-CVE-2026-46148 linux
- Ubuntu UBUNTU-CVE-2026-46148 linux-hwe-edge
参照URL
- advisory nvd.nist.gov
- advisory github.com
- package git.kernel.org
- web git.kernel.org
- web git.kernel.org
- web git.kernel.org
- web github.com