Vulnérabilité dans Kernel (CVE-2022-49504)
Résumé
Vulnérabilité dans Kernel (CVE-2022-49504). Risque d'opérations non autorisées ou de divulgation. Atténuation : mise à jour vers 5.18.3 ou plus.
Description d'origine
La description telle que publiée par la source (souvent en anglais).
In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Inhibit aborts if external loopback plug is inserted
After running a short external loopback test, when the external loopback is
removed and a normal cable inserted that is directly connected to a target
device, the system oops in the llpfc_set_rrq_active() routine.
When the loopback was inserted an FLOGI was transmit. As we're looped back,
we receive the FLOGI request. The FLOGI is ABTS'd as we recognize the same
wppn thus understand it's a loopback. However, as the ABTS sends address
information the port is not set to (fffffe), the ABTS is dropped on the
wire. A short 1 frame loopback test is run and completes before the ABTS
times out. The looback is unplugged and the new cable plugged in, and the
an FLOGI to the new device occurs and completes. Due to a mixup in ref
counting the completion of the new FLOGI releases the fabric ndlp. Then the
original ABTS completes and references the released ndlp generating the
oops.
Correct by no-op'ing the ABTS when in loopback mode (it will be dropped
anyway). Added a flag to track the mode to recognize when it should be
no-op'd.
Résumé généré automatiquement
Assemblé par SecPulse à partir des données sources (CVSS, CWE, versions affectées) à l'aide de modèles, sans IA. Vérifiez la description d'origine et les références ci-dessous.
Une vulnérabilité référencée CVE-2022-49504 a été découverte dans Kernel.
Risque d'opérations non autorisées ou de divulgation.
Action : mettez à jour Kernel vers 5.18.3 ou supérieur.
En cas de doute, contactez votre service informatique ou cherchez « Kernel CVE-2022-49504 » sur le site de l'éditeur.
CVE-2022-49504 (Kernel)
Correctif : 5.18.3 — appliquer immédiatement
Plan : 1) Audit SBOM, 2) Mise à jour staging→prod, 3) Surveillance WAF/proxy sur les endpoints affectés, 4) Recherche d'IOC dans les logs.
Réfs : voir GHSA / avis éditeur / version corrigée liés sur cette page.
Une vulnérabilité (non classée) affecte Kernel.
Consultez l'avis de l'éditeur pour les versions affectées de Kernel.
Gravité : ?. Risque d'opérations non autorisées ou de divulgation.
Mettre à jour vers 5.18.3.
En attendant le correctif : désactivez la fonctionnalité concernée, appliquez des règles WAF, ou restreignez l'accès par ACL réseau.
Recherchez dans les logs des requêtes correspondant aux IOC connus de cette CVE. Auditez les SBOM/dépendances.
Actions de réponse
Étapes concrètes et exemples de commandes que les équipes SOC/SRE doivent exécuter dans l'ordre
-
1Identify exposure identify
grep -r 'Kernel' . | grep -v node_modulesリポジトリと本番環境の依存ファイル (package-lock.json / requirements.txt / go.sum / Gemfile.lock 等) で
Kernelを grep し、稼働しているサービス・バージョンを把握する。 -
2Apply patch patch
Upgrade Kernel to 5.18.3ステージング環境で 5.18.3 に上げて回帰テスト → 本番反映。回帰テストはアプリの主要ハッピーパスを含めること。
-
3Post-deployment verification verify
Confirm patched version is live in productionパッチ適用後、ステージングで PoC または同等の悪用パターンを再現して脆弱性が閉じたことを確認。本番ではアクセスログ・WAF でアラート再発が無いか継続監視。
Paquets affectés
État des correctifs par distribution
Paquets corrigés publiés par chaque distribution pour cette CVE
- Debian DEBIAN-CVE-2022-49504 linux
- Ubuntu UBUNTU-CVE-2022-49504 linux
Références
- advisory github.com
- advisory nvd.nist.gov
- package git.kernel.org
- web git.kernel.org
- web git.kernel.org